Calcium and phosphate transport was examined in rabbit thin descending, thin ascending, and thick ascending limbs of Henle by in vitro perfusion of isolated tubular segments. Permeability coefficients for these segments with 45Ca and 32PO4 were determined for both lumen-to-bath and bath-to-lumen directions. Both the thin descending and thin ascending limbs were found to be relatively impermeable to both 45Ca and 32PO4. In neither segment were we able to show evidence for net transport of calcium or phosphate. In contrast, the thick ascending limb of Henle showed a decrease in calcium lumen-to-bath concentration from 0.97 +/- 0.02 to 0.88 +/- 0.02 when perfused at 4.8 nl min-1. 45Ca lumen-to-bath and bath-to-lumen fluxes were 19.96 +/- 1.05 and 9.89 +/- 0.02 peq-min-1-cm-1, respectively, and the potential difference was +3.8 +/- 0.3 mV (lumen positive). The observed calcium flux ratio was significantly higher than that predicted by Ussing's equation. When ouabain was added to the bath the potential difference fell to +1.1 +/- 0.3 mV, whereas the calcium efflux was only slightly diminished (29.5 +/- 5.3-23.7 +/- 5.1 peq-cm-1-min-1). Ouabain had no effect on the influx of Ca across the thick ascending limb of Henle. There was no net transport of phosphate across the thick ascending limb. Phosphate permeability was exceedingly low bidirectionally across the thick ascending limb. Our findings indicate: (a) all segments of Henle's loop are relatively impermeable to calcium and phosphate; (b) net transport of phosphate seems to be absent in Henle's loop; (c) net calcium reabsorption, which cannot be explained by passive mechanisms, occurs in the thick ascending limb.
A S Rocha, J B Magaldi, J P Kokko
Usage data is cumulative from February 2024 through February 2025.
Usage | JCI | PMC |
---|---|---|
Text version | 130 | 0 |
59 | 16 | |
Scanned page | 275 | 3 |
Citation downloads | 49 | 0 |
Totals | 513 | 19 |
Total Views | 532 |
Usage information is collected from two different sources: this site (JCI) and Pubmed Central (PMC). JCI information (compiled daily) shows human readership based on methods we employ to screen out robotic usage. PMC information (aggregated monthly) is also similarly screened of robotic usage.
Various methods are used to distinguish robotic usage. For example, Google automatically scans articles to add to its search index and identifies itself as robotic; other services might not clearly identify themselves as robotic, or they are new or unknown as robotic. Because this activity can be misinterpreted as human readership, data may be re-processed periodically to reflect an improved understanding of robotic activity. Because of these factors, readers should consider usage information illustrative but subject to change.